HCDC1 in 8 Out 40Amp Connector Power Splitter Distributor Source Strip Module

If you follow the direction and make sure you inset the tabs in properly it is a very good good and useful item.

A perfect power block to use for an amateur radio go-kit or other DC powered equipment. The fuses are clearly marked with their capacity; and as it uses standard Anderson power-pole fittings that makes it very useful for go-kits and other off-the-grid type electrical power situations. I may get a few more, just in case.

In my ham shack I noticed I was getting quite a number of 'wall worts' in operation which powered the numerous devices used to meter and monitor radio equipment. As each wall wort is a possible source of RF interference I got a nice DC power supply and converted all the 12V wall worts to power poles and now those devices are all fed through this. It is working fine and certainly freed up a number of receptacles.

The cost is a little high but much cheaper than multiple fuse holders. It uses automotive fuses so it is versatile. The fuse reaction time for this type of fuse is too slow for some electronic applications.

I received the power distributor, and hooked it up and tested it, and it works. Everything fits. But the surprise is that besides the main unit, it also came with some power pole connector pieces, including some boots, and that is just the extra professional touch that made me smile.Everything is very clearly labeled, VERY much so, which is great for a product that is usually stuck under the desk or shelf with bad lighting.This product looks like a second- or third-generation version and is well thought-out and well manufactured. And the different fuses for different current levels are the proper different colors which also adds to the usability and my comment about being well labeled.Super product, works for me, and does exactly what I need.

The device is amazing, well built and performs perfectly. The delivery driver was friendly and courteous.The package was a day late, however, much like half of everything I've ordered over the past few months.It really makes me question the value of our years-old Prime subscription.

Of all the underhanded "Fake" look-alike Anderson power pole distribution block, I fell prey to buying this product. Shame on merchant allowing customers to think this would even work with the Anderson power pole connectors. The pins are misaligned, wouldn't even hold the connection to keep power on! intermittent connection caused multiple fuses to blow because of electrical surge. Item sold and built to look like the West Mountain Radio Rig runner. DO NOT BUY HIGHLY DUBIOUS MEASUREMENTS, wires kept unplugging with the connectors for HAM gear needing 13.8 DC. Item isn't manufactured to meet ISO standards and specifications on Rig Runner, do not use with "real" Anderson power pole connectors. Look elsewhere, had it for a month and kept blowing the fuse due to wire electrical off-on connections!

Works perfect. All I had to do was install the correct size fuses for my needs. It does come with all the fuses shown but, they were too big for my use. My use was for one of our ham radio club's VHF repeater setup. Now the whole repeater station has battery backup when the power goes out. Well built. This is the second unit purchased and I have plans to purchase more.